Skip to main content

Filter By:

Chains

$32.99
- SLX/105 chain 11-speed chain - Sil-Tec surface treatment on roller plates only - Weight: 257g - Now with quick link - Refer to Documents and links to find the right product
$29.99
- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links
$29.99
Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links
$52.99
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)
$28.00
The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links
$50.00
Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
$28.00
The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems
$15.00
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
$19.00
SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.
$75.00
The all-new SRAM RED chain was redeveloped from the ground up. The unique link shape allows the chain to be narrower and lighter while increasing strength and providing more space between the outer plates of the chain and the cogs on either side. The result: a quieter chain with faster, more precise shifts. - Flattop technology enables a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner link plates and rollers for reduced wear and prolonged life - HollowPin construction for increased strength and efficiency - Chain length: 114 links
$40.00
The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that's compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long, and fast. This chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock
$32.00
With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.
$65.00
11 speed eBike chain to stand up to the high torque of a motor. - Built strong for your eBike - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems - Mushroomed Pin Riveted - 1/2" x 11/128"
$10.00 - $13.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
$25.00
The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams
$55.00
- 1/2" x 11/128" - 136 Links - Built strong for your eBike - EPT anti-rust coating - 10-speed - Compatible with Shimano, SRAM & Campagnolo 10-Speed Systems - Mushroomed Pin Riveted
$40.00 - $140.00
KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links
$25.00
- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch
$11.99
Z410 is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Includes KMC Master Link
$15.00
- 1/2” x 1/8” - 112 Links - Anti-Drop Design - RustBuster Function
$18.00
- 1/2” x 3/32” - 116 Links - Inner Plate Chamferring - RustBuster Function - Z Bridge Shape
$13.00
Z7 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape
$15.00 - $16.00
The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link
$18.00
The KMC Z8.1 Rustbuster is an 8-speed chain suitable for trekking, MTB, and city touring. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Z bridge outer plate offers extended compatibility - Rustbuster coating provides anit-rust protection - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 8 - Chain Connection Type: Reusable Master Link
$16.00
The Z8 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Designed for use with internally geared hubs - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Suitable for MTB, road, and comfort riding - 1/2 x 3/32"
Page 1 of 1